What did you do to your FJR today?
-
jblanken64
- Squid
- Posts: 38
- Joined: Mon Jan 20, 2014 2:19 pm
- FJRModel: 2008
- x 37
- x 12
Re: What did you do to your FJR today?
Change the old cracked coolant reservoir for a new one and changed the coolant.
-
Hack
- Veteran
- Posts: 633
- Joined: Mon Nov 26, 2018 6:25 pm
- FJRModel: 2016 ES
- Location: Waterdown On. Canada
- x 5
- x 1091
Re: What did you do to your FJR today?
Noticed one of the trim/cover pieces on the windshield was loose...
Looks like the tab where the bolt holds it in place has snapped... WTF?
Oh well... I knew I packed a roll of duct tape for a reason.
I'll try to JB weld a repair when I get home...
A new one costs $130.... another WTF?
Looks like the tab where the bolt holds it in place has snapped... WTF?
Oh well... I knew I packed a roll of duct tape for a reason.
I'll try to JB weld a repair when I get home...
A new one costs $130.... another WTF?
-
bill lumberg
- Contributor
- Veteran
- Posts: 2673
- Joined: Tue Jun 30, 2015 1:03 pm
- FJRModel: 2018ES/2022ES
- x 4140
- x 4645
- Contact:
Re: What did you do to your FJR today?
I’ve had two on the ‘18 break. Never had one break on the ‘14. Partspak was fairly cheap.
“Everybody wants to be a gangster until it’s time to do gangster shit” -Helen Keller
2022ES
2022ES
-
raYzerman
- Contributor
- I post more than I ride
- Posts: 10422
- Joined: Mon Mar 18, 2013 10:49 am
- FJRModel: 2010 Honda CBF1000FA
- Location: Millgrove, Ontario, CA
- x 3525
- x 12961
Re: What did you do to your FJR today?
Yeah, you ain't the only one... See me whenya get back. Permatex plastic epoxy..... got lots.Hack wrote: ↑Mon Jul 29, 2019 9:58 am Noticed one of the trim/cover pieces on the windshield was loose...
Looks like the tab where the bolt holds it in place has snapped... WTF?
Oh well... I knew I packed a roll of duct tape for a reason.
I'll try to JB weld a repair when I get home...
A new one costs $130.... another WTF?
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
Duct tape can't fix stupid, but it can sure muffle the sound.
-
bungie4
- I post more than I ride
- Posts: 7361
- Joined: Sat Jan 19, 2013 7:43 pm
- FJRModel: 2013 FJR 1300
- x 4057
- x 6948
Re: What did you do to your FJR today?
I twisted one of mine after i went gronk on it. Fixed it with some epoxy. $130 for a .06c piece of plastic. Ya nawHack wrote: ↑Mon Jul 29, 2019 9:58 am Noticed one of the trim/cover pieces on the windshield was loose...
Looks like the tab where the bolt holds it in place has snapped... WTF?
Oh well... I knew I packed a roll of duct tape for a reason.
I'll try to JB weld a repair when I get home...
A new one costs $130.... another WTF?
WWPD.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
-
ionbeam
- Contributor
- Veteran
- Posts: 2988
- Joined: Mon Feb 04, 2013 7:14 am
- FJRModel: '15ES in Low-Viz Assfault Gray
- Location: Sandown, NH
- x 534
- x 5425
Re: What did you do to your FJR today?
I had some help, my dealer broke mine when assembling the bike for delivery.bungie4 wrote: ↑Mon Jul 29, 2019 12:16 pmI twisted one of mine after i went gronk on it. Fixed it with some epoxy. $130 for a .06c piece of plastic. Ya nawHack wrote: ↑Mon Jul 29, 2019 9:58 am Noticed one of the trim/cover pieces on the windshield was loose...
Looks like the tab where the bolt holds it in place has snapped... WTF?
Oh well... I knew I packed a roll of duct tape for a reason.
I'll try to JB weld a repair when I get home...
A new one costs $130.... another WTF?
-
Hack
- Veteran
- Posts: 633
- Joined: Mon Nov 26, 2018 6:25 pm
- FJRModel: 2016 ES
- Location: Waterdown On. Canada
- x 5
- x 1091
-
FJRoss
- Veteran
- Posts: 2954
- Joined: Sat Apr 14, 2018 7:41 pm
- FJRModel: 2011 FJR 1300
2017 BMW F700GS - Location: Fredericton NB (Canada)
- x 955
- x 2758
Re: What did you do to your FJR today?
Medicine Hat to Brandon, MB?
Just a guess based upon distance travelled and going west to east...
-
Hack
- Veteran
- Posts: 633
- Joined: Mon Nov 26, 2018 6:25 pm
- FJRModel: 2016 ES
- Location: Waterdown On. Canada
- x 5
- x 1091
-
CollingsBob
- Contributor
- Veteran
- Posts: 2576
- Joined: Thu Mar 08, 2018 2:19 pm
- FJRModel: 2024 BMW R1300 GS
- Location: Winnipeg
- x 6412
- x 2794
-
El Toro Joe
- Contributor
- Veteran
- Posts: 4918
- Joined: Sat Jan 19, 2013 3:22 pm
- FJRModel: 2006A, 2016ES
- Location: North Coast of Ohio
- x 11017
- x 4250
Re: What did you do to your FJR today?
I rode it to work...
"RIP Beemerdons", "RIP Petey", "RIP JWilly", "RIP 1911"
-
Hppants
- Contributor
- I post more than I ride
- Posts: 7832
- Joined: Wed Oct 19, 2016 9:22 pm
- FJRModel: 2021ES
- x 15876
- x 15013
Re: What did you do to your FJR today?
Renewed the insurance today. Progressive, full coverage with $1,000 deductible, 250/500/100, $5K in accessory coverage. $407.00 for the annual premium. Not bad....
"I guess it comes down to a simple choice, really. Get busy living. Or get busy dying."
- Andy Dufresne, Shawshank Redemption
- Andy Dufresne, Shawshank Redemption
-
Cav47
- Veteran
- Posts: 4387
- Joined: Sun Feb 16, 2014 7:42 pm
- FJRModel: 2015 ES well appointed FJR
2012 KLX 250S
2022 Honda CRF450RL - Location: Central Illinois.
- x 12530
- x 9433
Re: What did you do to your FJR today?
Ordered new tires yesterday. Might be taking one last ride with Regs to color in North Dakota this weekend. Maybe see if that old fireman is gonna be around!
Hppants, CraigRegs, and gixxerjasen loved this
I often have found myself when I was not looking, nor did that discovery take place where I thought it would!
-
bungie4
- I post more than I ride
- Posts: 7361
- Joined: Sat Jan 19, 2013 7:43 pm
- FJRModel: 2013 FJR 1300
- x 4057
- x 6948
Re: What did you do to your FJR today?
Rode it to work. Cool and foggy this morning. A little chilly on the hwy.
WWPD.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
#SnowMexican
Choo choo mf'r.
D.F.I.U.N.
-
Hack
- Veteran
- Posts: 633
- Joined: Mon Nov 26, 2018 6:25 pm
- FJRModel: 2016 ES
- Location: Waterdown On. Canada
- x 5
- x 1091
Re: What did you do to your FJR today?
In the midst of run from Thunder Bay to home... 1600km.
I might just go right on thru or... stop half way.
I'll see how it goes
I might just go right on thru or... stop half way.
I'll see how it goes
Hppants, CollingsBob, and wheatonFJR loved this
-
ericboutin
- Member
- Posts: 196
- Joined: Mon Jun 24, 2013 8:02 pm
- FJRModel: 2004 Non ABS
- Location: Boiling Springs, SC
- x 126
- x 130
- Contact:
Re: What did you do to your FJR today?
Had to walk past today but I forgot to post that I did ride it to work on Monday and Tuesday!
wheatonFJR loved this
---------------------------
Thanks Eric
IBA #77838
2004 Yamaha FJR 1300 Non ABS
1984 Honda Nighthawk CB 700S
Thanks Eric
IBA #77838
2004 Yamaha FJR 1300 Non ABS
1984 Honda Nighthawk CB 700S
-
Cav47
- Veteran
- Posts: 4387
- Joined: Sun Feb 16, 2014 7:42 pm
- FJRModel: 2015 ES well appointed FJR
2012 KLX 250S
2022 Honda CRF450RL - Location: Central Illinois.
- x 12530
- x 9433
Re: What did you do to your FJR today?
Cav47 wrote: ↑Sun Jul 28, 2019 10:08 pmCav47 wrote: ↑Sat Jul 27, 2019 3:30 pm Was tired of the front end wobble I was getting over 75ish from a crappy balancing job by my local guy who mostly does Harley tires. He is cheap, but as usual, you get what you pay for.
So I got into my stash of Balancing Beads and dropped 1.5 Oz in there. The tire is still in good shape, I want to see if this clears it up or not. If it does, great, if it doesn’t, then I will know I need to buy a balanced. Will report back with results later.
The vibration is reduced after testing today. NOT ELIMINATED like I hoped. Definitely less, but not gone. Well this gives me a great reason to buy a balancer. Prob should start looking for a tire changer too. With 2 bikes and soon to be needing 4 tires changed, I would start off well by taking 80 bucks off whatever I buy (in savings from my local guy).
Took off the weights that were left after a power washing. The original balancing job was suspect anyway. I ran it up to 85 and nary a shimmy that I could tell.
The beads that I put in there seem to have smooth out the vibration well enough. We shall see on the ride to Des Moines if all is well!
Oh, and by the way, I ordered tires from Rocky Mountain ATV at 8:12 on Tuesday. They showed up today by 10:00. “Shinko Verge 2X” for $214 delivered. Sweet. I have not run the Verge 2X yet but will see. Mileage report on the current tire is gonna be close to 7K when I get to Regs Friday.
I often have found myself when I was not looking, nor did that discovery take place where I thought it would!
-
Hack
- Veteran
- Posts: 633
- Joined: Mon Nov 26, 2018 6:25 pm
- FJRModel: 2016 ES
- Location: Waterdown On. Canada
- x 5
- x 1091
Re: What did you do to your FJR today?
Well.... My run from T-Bay home has been derailed...
Hwy 17 closed near Marathon since 21:45 Wednesday night due to a major MVC and fatality...
Sat for 3 hours...
Chillin' in the Sault... 'Will ride the last 730km tomorrow
Hwy 17 closed near Marathon since 21:45 Wednesday night due to a major MVC and fatality...
Sat for 3 hours...
Chillin' in the Sault... 'Will ride the last 730km tomorrow
bungie4, CollingsBob, wheatonFJR and 1 others loved this
-
Cav47
- Veteran
- Posts: 4387
- Joined: Sun Feb 16, 2014 7:42 pm
- FJRModel: 2015 ES well appointed FJR
2012 KLX 250S
2022 Honda CRF450RL - Location: Central Illinois.
- x 12530
- x 9433
Re: What did you do to your FJR today?
Ride safe Hack!
CollingsBob and wheatonFJR loved this
I often have found myself when I was not looking, nor did that discovery take place where I thought it would!
-
CollingsBob
- Contributor
- Veteran
- Posts: 2576
- Joined: Thu Mar 08, 2018 2:19 pm
- FJRModel: 2024 BMW R1300 GS
- Location: Winnipeg
- x 6412
- x 2794
Re: What did you do to your FJR today?
I overfilled the coolant reservoir, then slowly removed most of the excess using a length of hose and my thumb on one end..the remaining excess dripped out of the overflow when I brought the engine up to temperature.
Then the Panavise actiongrip that I bought off Amazon showed up, with the locking lever installed upside down..off to Home Depot to get a length of steel rod, cut some threads on one end and loctite a nut on it. Tomorrow I’ll remove the rivet holding the lever in the suction cup, flip the lever over, measure the rod, cut it to length and cut some threads on the other end..
Then the Panavise actiongrip that I bought off Amazon showed up, with the locking lever installed upside down..off to Home Depot to get a length of steel rod, cut some threads on one end and loctite a nut on it. Tomorrow I’ll remove the rivet holding the lever in the suction cup, flip the lever over, measure the rod, cut it to length and cut some threads on the other end..