Possible Failing Ignition Lock

Tech section strictly for the FJR. Everything from oil changes & suspension setup's to removing sheep hair from hard to reach places on the bike so that your wife never finds out.
User avatar
bill lumberg
Contributor
Veteran
Posts: 2671
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 4138
x 4629
Contact:

Possible Failing Ignition Lock

Post by bill lumberg »

I’ve always kept my locks lightly lubed. Never an issue. Then, after a long day in the mountains, zero issues, the next morning, the bike is almost impossible to start.

The electricals and engine are fine. The lock is the problem. Regardless of the key, it takes some serious fiddling to get the key to turn. Normally, any stickiness disappears with a squirt of light silicon lube. No dice this time. I’m worried it’s going to lock up permanently and strand me. I have no idea what has gone wrong.

What is the process for replacing one of these? How hard is it?
“Everybody wants to be a gangster until it’s time to do gangster shit” -Helen Keller

2022ES
User avatar
FJRoss
Veteran
Posts: 2859
Joined: Sat Apr 14, 2018 7:41 pm
FJRModel: 2011 FJR 1300
2017 BMW F700GS
Location: Fredericton NB (Canada)
x 891
x 2616

Re: Possible Failing Ignition Lock

Post by FJRoss »

Is the cylinder stiff to turn overall or just difficult to get it started moving? You mentioned "regardless of key" so I suppose that it isn't due to a worn key although the "pins" might be worn. Might be worth talking to a locksmith. Perhaps the entire mechanism can be flushed and gunk cleared out. Perhaps it is something a 'smith can repair. At least on earlier Gen I & II, the ignition switch/lock isn't that difficult to remove. The security bolts need to be drilled out...

Good luck.
bill lumberg loved this
User avatar
bill lumberg
Contributor
Veteran
Posts: 2671
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 4138
x 4629
Contact:

Re: Possible Failing Ignition Lock

Post by bill lumberg »

Thanks. Keys aren’t the issue. It just won’t turn at all most of the time. If you can coax it to move at all, then it turns normally.

It’s been flushed. Other than compressed air to see if I can clear something, I don’t know what else to try short of replacement or a smith. It’s pretty sketchy.
“Everybody wants to be a gangster until it’s time to do gangster shit” -Helen Keller

2022ES
wheatonFJR
Contributor
I post more than I ride
Posts: 21040
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 46358
x 19812

Re: Possible Failing Ignition Lock

Post by wheatonFJR »

Holy Crap!
boatanchor, 3rd class.
User avatar
mcatrophy
Member
Posts: 258
Joined: Sat Jan 19, 2013 8:00 am
FJRModel: 2018 FJR1300AS
Location: Derby, UK
x 60
x 658
Contact:

Re: Possible Failing Ignition Lock

Post by mcatrophy »

From your description it sounds like either the key is worn sufficiently that it's not activating the lock's mechanism correctly, or there is something jamming it.

You say "keys", presumably both keys behave the same, in which case it's most likely jamming.

Are you sure it's fully inserted? I once had an occasion when I had something preventing full insertion of the key, it wouldn't go down the last fraction of a millimetre. Managed to clear it by a combination of a lot of WD-40, pushing the key in, wiggling it, turning when it would, withdrawing it etc.
Road Runner loved this
mcatrophy
2018 FJR1300AS - AE in the USA, if only they could have one :o .
2014 FJR1300AS 2010 FJR1300AS 2006 FJR1300AS '02 Trophy 1200 '01 Bonnevill '55 Tiger Cub
ImageMy web site
User avatar
extrememarine
HMFIC
I post more than I ride
Posts: 7143
Joined: Sun Jan 13, 2013 12:17 pm
FJRModel: 2009 FJR
Location: SE Michigan
x 2328
x 14264
Contact:

Re: Possible Failing Ignition Lock

Post by extrememarine »

I had to swap out the ignition on my 2009 this spring; the mechanism had gotten to the point where when it was stuck, I could not get the key to rotate to the on position or out of the lock position. I flushed it and it would free up temporary, but still had issues with both keys. Keys worked fine in gas tank, side bags and seat release. I was worried it would leave me stranded, so I swapped to a spare and have lived with having one key for the ignition and a different key for the gas tank, side bags, seat latch.

good luck...
bill lumberg wrote: Mon Nov 15, 2021 11:56 am Thanks. Keys aren’t the issue. It just won’t turn at all most of the time. If you can coax it to move at all, then it turns normally.

It’s been flushed. Other than compressed air to see if I can clear something, I don’t know what else to try short of replacement or a smith. It’s pretty sketchy.
Ride There!
-Wayne aka asphalt surfer...

IBA#60836

#Peteyismyhero & #JWillywashere
User avatar
bill lumberg
Contributor
Veteran
Posts: 2671
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 4138
x 4629
Contact:

Re: Possible Failing Ignition Lock

Post by bill lumberg »

Exact same here.
extrememarine wrote: Mon Nov 15, 2021 12:21 pm I had to swap out the ignition on my 2009 this spring; the mechanism had gotten to the point where when it was stuck, I could not get the key to rotate to the on position or out of the lock position. I flushed it and it would free up temporary, but still had issues with both keys. Keys worked fine in gas tank, side bags and seat release. I was worried it would leave me stranded, so I swapped to a spare and have lived with having one key for the ignition and a different key for the gas tank, side bags, seat latch.

good luck...
bill lumberg wrote: Mon Nov 15, 2021 11:56 am Thanks. Keys aren’t the issue. It just won’t turn at all most of the time. If you can coax it to move at all, then it turns normally.

It’s been flushed. Other than compressed air to see if I can clear something, I don’t know what else to try short of replacement or a smith. It’s pretty sketchy.
“Everybody wants to be a gangster until it’s time to do gangster shit” -Helen Keller

2022ES
User avatar
Cav47
Veteran
Posts: 4280
Joined: Sun Feb 16, 2014 7:42 pm
FJRModel: 2015 ES well appointed FJR
2012 KLX 250S
2022 Honda CRF450RL
Location: Central Illinois.
x 12141
x 8925

Re: Possible Failing Ignition Lock

Post by Cav47 »

bill lumberg wrote: Mon Nov 15, 2021 12:24 pm Exact same here.
extrememarine wrote: Mon Nov 15, 2021 12:21 pm I had to swap out the ignition on my 2009 this spring; the mechanism had gotten to the point where when it was stuck, I could not get the key to rotate to the on position or out of the lock position. I flushed it and it would free up temporary, but still had issues with both keys. Keys worked fine in gas tank, side bags and seat release. I was worried it would leave me stranded, so I swapped to a spare and have lived with having one key for the ignition and a different key for the gas tank, side bags, seat latch.

good luck...
bill lumberg wrote: Mon Nov 15, 2021 11:56 am Thanks. Keys aren’t the issue. It just won’t turn at all most of the time. If you can coax it to move at all, then it turns normally.

It’s been flushed. Other than compressed air to see if I can clear something, I don’t know what else to try short of replacement or a smith. It’s pretty sketchy.

Sounds like someone is just pouring on the reasons to get a new bike. I support this mission.
wheatonFJR, gixxerjasen, bill lumberg and 1 others loved this
I often have found myself when I was not looking, nor did that discovery take place where I thought it would!

Image
User avatar
bill lumberg
Contributor
Veteran
Posts: 2671
Joined: Tue Jun 30, 2015 1:03 pm
FJRModel: 2018ES/2022ES
x 4138
x 4629
Contact:

Re: Possible Failing Ignition Lock

Post by bill lumberg »

Shit. The part alone is $150, and the bike is under warranty. I may be making a trip to the dealer (where a shiny 2021 still resides), one way or the other. :)

Almost being stranded makes me wonder if this can be brute forced with a screwdriver, or whether that would even help. Thinking of worst case scenario.
“Everybody wants to be a gangster until it’s time to do gangster shit” -Helen Keller

2022ES
User avatar
Hppants
Contributor
I post more than I ride
Posts: 7381
Joined: Wed Oct 19, 2016 9:22 pm
FJRModel: 2021ES
x 14875
x 13742

Re: Possible Failing Ignition Lock

Post by Hppants »

Try some graphite key lubricant. Put some lube on the key and work it in and out. I've had better luck with sticky locks with that stuff than silicone spray.

Also, confirming that more than one key, inserted either way, is yielding the same results?
gixxerjasen loved this
"I guess it comes down to a simple choice, really. Get busy living. Or get busy dying."
- Andy Dufresne, Shawshank Redemption

Image
User avatar
danh600
Veteran
Posts: 4683
Joined: Tue Mar 25, 2014 3:36 pm
FJRModel: 2022 FJR1300ES
Location: Roughedge,NC
x 5848
x 9987

Re: Possible Failing Ignition Lock

Post by danh600 »

I have good luck with this stuff on sticky pad locks. So far my FJR is working fine. Maybe cause I spray some of this from time to time.

https://www.3inone.com/products/lock-dry-lube/

Every once in awhile I hit every lock I own with this stuff.
User avatar
extrememarine
HMFIC
I post more than I ride
Posts: 7143
Joined: Sun Jan 13, 2013 12:17 pm
FJRModel: 2009 FJR
Location: SE Michigan
x 2328
x 14264
Contact:

Re: Possible Failing Ignition Lock

Post by extrememarine »

Interesting, my spare ignition only cost me a fractured tibia and tow truck...

The Gen 2's had an ignition recall, and there was a bush fix that was basically the equivelent to hot-wiring the bike to bypass the malfunctioning ignition switch - ask Jwilly about doing that to a bike at EOM in Cumberland Falls that actually only had a loose battery cable...
bill lumberg wrote: Mon Nov 15, 2021 2:03 pm Shit. The part alone is $150, and the bike is under warranty. I may be making a trip to the dealer (where a shiny 2021 still resides), one way or the other. :)

Almost being stranded makes me wonder if this can be brute forced with a screwdriver, or whether that would even help. Thinking of worst case scenario.
wheatonFJR and bill lumberg loved this
Ride There!
-Wayne aka asphalt surfer...

IBA#60836

#Peteyismyhero & #JWillywashere
wheatonFJR
Contributor
I post more than I ride
Posts: 21040
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 46358
x 19812

Re: Possible Failing Ignition Lock

Post by wheatonFJR »

:D :D :D
boatanchor, 3rd class.
User avatar
griff
Veteran
Posts: 723
Joined: Fri Jan 18, 2013 11:42 pm
FJRModel: 2014 ES
Location: Greer, SC
x 265
x 756

Re: Possible Failing Ignition Lock

Post by griff »

Timely post Bill. My ignition switch has given me the same fits for about a year. Since I have a lot more miles than you, I better get down to Hotlanta and snatch that 21. 8-)
Uncle Hud and Road Runner loved this
Image
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 10163
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3390
x 12549

Re: Possible Failing Ignition Lock

Post by raYzerman »

When you put the key in, the tumblers push out or in to become flush with the outer barrel. When flush, it will turn, if one tumbler is still sticking up a bit (worn key or worn tumbler), it won't let the barrel turn. You can see this on any simple lock........
If you have the ignition switch out and can disassemble the barrel, insert key and then you can file down any tumbler sticking out... or a locksmith can either get you a new key or replace a worn tumbler.......

To get the ignition switch off, you need to remove the upper triple tree, then there are two security bolts holding it on. The heads break off at installation... so, 1/8" drill a pilot hole, then a 3/8" drill to essentially drill down until the "heads" are gone. Remove switch, then can unscrew the remaining parts of the two bolts. New bolts can be standard 8mm metric.......
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
FastPappy
Veteran
Posts: 545
Joined: Sun Sep 13, 2020 8:20 am
FJRModel: 2009 AE
Location: Staten Island, New York
x 1365
x 646

Re: Possible Failing Ignition Lock

Post by FastPappy »

My recent trip to the dealer revealed that the ignition switch recall was never done so they did it while the other work was being done. Having a separate key for the ignition now is a bit of a PITA but it's good having the piece of mind that it was done. ;)
Pappy 09AE
wheatonFJR
Contributor
I post more than I ride
Posts: 21040
Joined: Wed Jan 16, 2013 6:10 pm
FJRModel: 2013-Jwilly Special LD Delivery
Location: Travelers Rest
x 46358
x 19812

Re: Possible Failing Ignition Lock

Post by wheatonFJR »

griff wrote: Mon Nov 15, 2021 10:25 pm Timely post Bill. My ignition switch has given me the same fits for about a year. Since I have a lot more miles than you, I better get down to Hotlanta and snatch that 21. 8-)
I wouldn't worry about that griff. I'm guessing that Lumberg is in the mood for fahrvergnugen auf dem BMW S1000RR.
boatanchor, 3rd class.
User avatar
Festus
Contributor
I post more than I ride
Posts: 5205
Joined: Tue Mar 28, 2017 3:40 pm
FJRModel: 2013 FJR, 2023 KTM 390 Adventure
x 4275
x 11926

Re: Possible Failing Ignition Lock

Post by Festus »

I'd try dry graphite in it, not anything liquid. Most liquid things are very bad for locks. You can get a tube of graphite in the key cutting areas of any big box store. I'd try that before anything else. Most everything else will attract dirt and make it stick.
"That wasn’t as bad as I thought it would be" - 1911

"Stay thirsty, my friends"....... Wouldn't that mean I'm dehydrated all the time?
User avatar
raYzerman
Contributor
I post more than I ride
Posts: 10163
Joined: Mon Mar 18, 2013 10:49 am
FJRModel: 2010 Honda CBF1000FA
Location: Millgrove, Ontario, CA
x 3390
x 12549

Re: Possible Failing Ignition Lock

Post by raYzerman »

I'll disagree with graphite, it can gum up the works after while.... I'd flush it a coupla more times. Might even be a bit of build-up at the tip preventing the key from going in that last 1/2mm..... if that don't work..... we'll talk later.

Back in the say, I knew a few that bought new cars every year, some of them said because the ashtray was full.... you can find almost any reason to get a new bike, want a list?
Keep yer stick on the ice........... (Red Green)
Duct tape can't fix stupid, but it can sure muffle the sound.
User avatar
Auburn
Contributor
Veteran
Posts: 736
Joined: Mon Mar 31, 2014 1:11 pm
FJRModel: 2006
x 2154
x 1288

Re: Possible Failing Ignition Lock

Post by Auburn »

PM sent, I have a new one that I got just before the recall on Gen II and never had to install. Always carried it for a spare even though I out the Brodie harness on mine.
get out and ride! IBA #54706
Post Reply