What did you do to your FJR today?

wheatonFJR · Post by **wheatonFJR** » Thu Mar 05, 2020 4:56 pm

<Stands up and applauds> AWESOME, Alan!

FJRoss · Post by **FJRoss** » Thu Mar 05, 2020 5:19 pm

A 4-4-2 that didn't get extraordinarily bad mileage wouldn't be much fun.

bill lumberg · Post by **bill lumberg** » Thu Mar 05, 2020 5:22 pm

Like.

ice_station_zebra · Post by **ice_station_zebra** » Thu Mar 05, 2020 7:54 pm

Got to work and finished bleeding the brakes and used Rayzerman's ABS test harness for the first time! So easy now with the speed bleeders.
Also installed Garauld's stiffy kit without a hitch and put the tail back together again.

bill lumberg · Post by **bill lumberg** » Sat Mar 07, 2020 8:07 am

Rode it home from the office after dropping off work vehicle. After being outside in the 60’s and 70’s all week, and 31F had me considering putting the Cee Bailey back on by the time I got home.

Spininprop · Post by **Spininprop** » Sat Mar 07, 2020 9:32 am

60s called for tomorrow around here in pa. May have to burn off some of the winter fuel.

El Toro Joe · Post by **El Toro Joe** » Sun Mar 08, 2020 2:33 pm

Washed it

gixxerjasen · Post by **gixxerjasen** » Sun Mar 08, 2020 4:34 pm

El Toro Joe wrote: ↑Sun Mar 08, 2020 2:33 pm Washed it

Why?

wheatonFJR · Post by **wheatonFJR** » Sun Mar 08, 2020 5:01 pm

gixxerjasen wrote: ↑Sun Mar 08, 2020 4:34 pm
El Toro Joe wrote: ↑Sun Mar 08, 2020 2:33 pm Washed it
Why?

Im guessing mitigation against dry salt intrusion.

wheatonFJR · Post by **wheatonFJR** » Sun Mar 08, 2020 5:02 pm

Rode the f@$k out of it.

Cav47 · Post by **Cav47** » Mon Mar 09, 2020 12:23 am

Finally installed the brake assembly that Jim (Morecowbell) sent me. New pads went in also. Thanks again Jim. Next time we are together, I owe you at least a few drinks.

Brake bleeding will have to happen soon. Andy is sending me some speed bleeders, I might wait, but I only had Dot 3 fluid here. Gotta pick up the Dot 4 tomorrow. Pictures of the messed up assembly coming soon.

I only had to switch out the piston portion. Dripped just a little fluid out when swapping it out. I looked at my brake fluid level and it was unchanged.

Cav47 · Post by **Cav47** » Mon Mar 09, 2020 12:27 am

This is what happens when some dumbass puts both pads on the inside and lets the rotor touch the assembly opposite the piston. The aluminum parts are no match for the steel rotors. Oh yeah, that DUMB ASS was me.

Not supposed to be shiny parts on the assembly.

Sent from my iPhone using Tapatalk

FJRoss · Post by **FJRoss** » Mon Mar 09, 2020 7:01 am

I would have thought you would notice the noise long before that much damage was done. The exposed part of the piston looks a bit corroded as well. I assume it was OK further in.

Spininprop · Post by **Spininprop** » Mon Mar 09, 2020 7:09 am

Rode it to work. 70 degrees called for today. Warm for pa this time of year... I'll take it.

BkerChuck · Post by **BkerChuck** » Mon Mar 09, 2020 7:15 am

Rode to work this morning. Like ^ looking forward to the great day on the ride home.

El Toro Joe · Post by **El Toro Joe** » Mon Mar 09, 2020 7:16 am

gixxerjasen wrote: ↑Sun Mar 08, 2020 4:34 pm
El Toro Joe wrote: ↑Sun Mar 08, 2020 2:33 pm Washed it
Why?

Because in the winter up here in northeast Ohio, they dump tons of this stuff called salt, to melt the snow and ice...and when you ride all year, that salt gets on things, and that's generally not good, so every now and then you need to wash that shit off.

Oh, and I rode to work today

wheatonFJR · Post by **wheatonFJR** » Mon Mar 09, 2020 7:22 am

FJRoss wrote: ↑Mon Mar 09, 2020 7:01 am I would have thought you would notice the noise long before that much damage was done.

Must have been jammin to some heavy metal right from the get go. I noticed he didn't post this on a Friday...but it's almost worthy.....

gixxerjasen · Post by **gixxerjasen** » Mon Mar 09, 2020 8:16 am

El Toro Joe wrote: ↑Mon Mar 09, 2020 7:16 am
gixxerjasen wrote: ↑Sun Mar 08, 2020 4:34 pm
El Toro Joe wrote: ↑Sun Mar 08, 2020 2:33 pm Washed it
Why?
Because in the winter up here in northeast Ohio, they dump tons of this stuff called salt, to melt the snow and ice...and when you ride all year, that salt gets on things, and that's generally not good, so every now and then you need to wash that shit off.

Oh, and I rode to work today

Ahh yes, I recall that stuff and washing it off of my wife's car. I don't recall owning a street bike up there though, sadly. I did get to ride some sweet tracks though.

Cav47 wrote: ↑Mon Mar 09, 2020 12:27 am This is what happens when some dumbass puts both pads on the inside and lets the rotor touch the assembly opposite the piston. The aluminum parts are no match for the steel rotors. Oh yeah, that DUMB ASS was me.

Damn dude, that's pretty bad. Almost as bad as my stuff, but you got a bit more dumb ass to do if you want to top me.

danh600 · Post by **danh600** » Mon Mar 09, 2020 8:53 am

Got to ride a bit this weekend. Bob (Intech) set my suspension. It wasn't too far off, but he firmed a few things up. It felt better but I was overthinking the riding after the adjustments. I am looking forward to this weekend where I can just start being one with the bike.

I am a pretty conservative rider and have to spend most of my time in Florida. So I am going to put off any kind of suspension upgrades for the time being. I plan to just make one more adjustment Bob told me about. Then ride it for awhile. Then making do some adjustments as I understand suspension set ups.

Post by **extrememarine** » Mon Mar 09, 2020 9:11 am

Cav47 wrote:This is what happens when some dumbass puts both pads on the inside and lets the rotor touch the assembly opposite the piston. The aluminum parts are no match for the steel rotors. Oh yeah, that DUMB ASS was me.

Not supposed to be shiny parts on the assembly.

Sent from my iPhone using Tapatalk

That one is almost as good as the ABS failure last year.

I suggest we start a "maintenance FUBAR' of the year contest. Winner gets a factory service manual.

Sent from my SM-G960U using Tapatalk

FJRiders.com

What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: What did you do to your FJR today?

Re: RE: Re: What did you do to your FJR today?